In-PersonAestheticsAll Levels

Facial anatomy and injectable cadaver course (filler & Botox from A to Z)

Inject your own specimen. Then open it and see exactly where your product went.

2 Steps
Certificate Included

What You'll Learn

  • Identify the fat compartments, retaining ligaments, muscles and arteries of the upper and lower face on a living patient, by palpation and surface landmark.
  • State the correct plane for every common injection point, and justify it anatomically.
  • Map the danger zones of the face and name the vessel that makes each one dangerous.
  • Recognise your own placement errors, having seen your own injections dissected.
  • Plan a full face treatment with toxin and filler in one session.
  • Recognise vascular occlusion early and carry out a hyaluronidase protocol.

About This Course

Two days in the cadaver laboratory with an internationally recognised aesthetic doctor and a university professor of anatomy. Each morning the anatomy is drawn live on a real face and the injection plan is marked on it. Each afternoon you reproduce those exact points on your own specimen, with our trainer supervision, and then dissect layer by layer to find your own product in the tissue.

Not where you thought it went. Where it went.

Program

Cadaver course, hands-on

Botox and fillers from A to Z. Two days. ICLO San Francesco di Sales, Verona

Why this course

Your own specimen, both days

Four doctors per head, and the same head from the first cut to the last. You follow every layer in sequence, which is impossible if you move between tables.

A clinical injector and an academic anatomist, teaching together

You get the anatomy and the clinical judgement from the top of each field, at the same table. The anatomist shows you what is there. The injector tells you what it means for your needle.

Living face first, then cadaver

Before each laboratory session the anatomy is mapped on a living model: fat compartments, retaining ligaments, vessels and danger zones, then the full injection plan with depth and volume for each point. Minutes later you find those same structures in the tissue in front of you. A male and a female face are mapped, so you see how the plan changes between them.

A lot of specimens in one room

You see your own anatomy, and you see how different it was at the other specimens tables. The textbook gives one artery in one place. Ten real faces give you the range, which is what actually decides how much margin your technique needs.

Before you arrive

Four weeks before the course you receive E learning material

  • 1. The layered face · The five layers and how they change by region. Retaining ligaments.
  • 2. Facial ageing · Bone resorption, fat compartment deflation and descent, ligament laxity, skin change.
  • 3. Vascular anatomy · Facial, angular, supratrochlear, supraorbital and labial arteries. The six danger zones.
  • 4. Toxin science · Mechanism, unit systems, reconstitution and dilution, immunogenicity, contraindications.
  • 5. Filler science · Crosslinking, G prime, cohesivity, matching rheology to plane. Hyaluronidase protocol.

A pass is required to enter the laboratory. This is what lets the course begin at an advanced level instead of spending the first morning on basics.

Day 1. Upper face
  • 08:30 · Registration and table allocation · Coordinator
  • 09:00 · Welcome and introduction to IAAI
  • 09:05 · Lecture: upper face anatomy and injection · Course director
  • 10:05 · Coffee
  • 10:20 · Live anatomy mapping and injection plan, male and female models · Lead trainer
  • 12:00 · Laboratory: injection on your own specimen · Lead anatomist and trainers
  • 12:30 · Laboratory: skin and superficial fat · Lead anatomist and trainers
  • 14:00 · Lunch
  • 15:00 · Laboratory: muscles and temporal fascia · Lead anatomist and trainers
  • 16:15 · Break
  • 16:30 · Laboratory: deep layer, vessels and danger zones · Lead anatomist and trainers
  • 17:30 · Recap. · Faculty
  • 18:00 · End of day
  • 20:00 · Gala dinner

Scientific content, Day 1

Lecture

  • Frontal region: frontalis, galea, superficial and deep fat compartments.
  • Glabellar complex: corrugator, procerus, depressor supercilii and their interaction.
  • Temporal region in full depth: temporoparietal fascia, superficial temporal artery, deep temporal fascia, temporal fat pads, temporalis, periosteum.
  • Periorbital region: orbicularis oculi, orbital septum, suborbicularis oculi fat, orbital retaining ligament, tear trough ligament.
  • Toxin of the upper face: glabellar pattern assessment, frontalis and the brow, lateral orbicularis, brow shaping, complications and their management.
  • Filler of the upper face: temple, brow, supraorbital hollow, tear trough. Volume, speed and pressure as safety tools.
  • Vascular safety: the retrograde embolisation mechanism, early recognition, the hyaluronidase protocol, referral pathway.

Live mapping on models

  • Facial assessment and proportion on a living face.
  • Drawing the fat compartments, retaining ligaments, arteries and danger zones of the upper face.
  • Male and female upper face mapped side by side.
  • The full injection plan marked with depth and volume per point. These are the points you reproduce in the laboratory.

Laboratory

  • Injection · Inject your own specimen at the marked points, through intact skin, with tinted product
  • Superficial · Raise skin and superficial fat. Identify the forehead compartments. First sight of your own product, and its plane compared against the plane you intended.
  • Muscle · Frontalis, corrugator, procerus, orbicularis oculi. Temporoparietal fascia, superficial temporal artery, frontal branch of the facial nerve. Your toxin points compared against the muscle actually beneath them.
  • Deep · Retro orbicularis fat, orbital retaining ligament, temporal ligamentous adhesion, deep temporal fascia, temporal fat pads, sentinel vein. Supratrochlear and supraorbital bundles followed to their foramina.
Day 2. Lower face
  • 09:00 · Lecture: lower face anatomy and injection · Course director
  • 10:00 · Coffee
  • 10:15 · Live anatomy mapping and injection plan, male and female models · Lead trainer
  • 12:00 · Laboratory: injection on your own specimen · Lead anatomist and trainers
  • 12:30 · Laboratory: skin, superficial fat and muscles · Lead anatomist and trainers
  • 14:00 · Lunch
  • 15:00 · Laboratory: deep layer and arteries · Lead anatomist and trainers
  • 16:15 · Break
  • 16:30 · Laboratory: nerves and glands · Lead anatomist and trainers
  • 17:30 · Recap, certificates and photographs · Faculty

Scientific content, Day 2

Lecture

  • Midface: malar fat pad, deep medial cheek fat, suborbicularis oculi fat, zygomatic ligaments.
  • Perioral: orbicularis oris, modiolus, depressor anguli oris, mentalis, labial artery depth and variation.
  • Mandibular: mandibular ligament, jowl fat, prejowl sulcus, chin anatomy.
  • Parotid masseteric: parotid gland and duct, masseter, facial nerve branches, marginal mandibular nerve.
  • Toxin of the lower face: masseter, depressor anguli oris, mentalis, lip flip, gummy smile, platysmal bands, and the complications specific to each.
  • Filler of the lower face: cheek and midface vectors, chin projection, jawline and prejowl, lip technique and depth, nasolabial fold.

Live mapping on models

  • Assessing the lower third: chin projection, jawline definition, lip proportion.
  • Drawing the compartments, ligaments, facial artery course and danger zones.
  • Feminisation and masculinisation of the lower face, mapped on two models.
  • The full injection plan marked with depth and volume per point.

Laboratory

  • Injection · Inject the lower face through intact skin. The lower face of your specimen is untouched: nothing was opened there on day one.
  • Superficial · Nasolabial, malar and jowl compartments. Zygomaticus major and minor, orbicularis oris, depressor anguli oris. Zygomatic and mandibular ligaments.
  • Deep · Deep medial cheek fat, suborbicularis oculi fat, buccal fat. Facial artery traced from the mandibular border to the angular artery. The true depth of the labial arteries in your own specimen.
  • Nerves and glands · Masseter, parotid gland and duct, marginal mandibular nerve, infraorbital and mental foramina. You locate your own deposits in relation to the vessels you have exposed.

Full faculty biographies are published closer to the course date.

Format and certification
  • Per specimen: 4 doctors, same specimen both days
  • Laboratory time: About 8 hours per participant
  • Certification: ICLO San Francesco di Sales, BACME recognition, IAAI certificate of completion
  • Venue: ICLO San Francesco di Sales, Verona
  • Dates: 21-22 Mar 2027
Extra

Accommodations

Travel and accommodation are not included. We hold a block at a four star hotel near the laboratory and can book it for you.

Observation programme

Two days. Cadaver course in facial injectables. ICLO San Francesco di Sales, Verona, 21-22 Mar 2027.

Two days inside a cadaver laboratory, without a scalpel in your hand.

You attend every lecture, watch the anatomy drawn live on a real face, and stand in the laboratory while ten specimens are dissected layer by layer. An anatomist stays with the observation group the whole time, explaining what is being uncovered at each table.

This is the full academic content of our cadaver course, attended exactly as the hands-on participants attend it. The only thing you do not do is dissect.

Who this is for

  • Doctors who want the anatomy before committing to a hands-on course.
  • Injectors who want to see danger zones in real tissue but are not ready to dissect.
  • Nurses, practitioners and clinic staff who cannot be allocated a specimen.
  • Doctors returning for a second year, to watch after having dissected once.
  • Clinic owners who want to understand what their injectors are being taught.

What you will take away

  • The five layers of the face, seen in real tissue rather than in a diagram.
  • The fat compartments and retaining ligaments, and why folds form where they do.
  • The true course and depth of the facial artery, the labial arteries and the supratrochlear artery, as they appear in ten different faces.
  • The danger zones of the face, and what makes each one dangerous.
  • A full injection plan for the upper and lower face, mapped on a living model.
  • What vascular occlusion looks like, and the hyaluronidase protocol.

Programme

Before you arrive

weeks before the course you receive ELearning material modules: facial layers, ageing, vascular anatomy, toxin science and filler science., at your own pace. Access continues for 6 months.

Observers are not required to pass the assessment, but you are strongly advised to complete the modules. The course begins at an advanced level.

Day 1. Upper face

  • 08:30 · Registration · Badges and welcome pack
  • 09:00 · Welcome and introduction to IAAI · Seated
  • 09:05 · Lecture: upper face anatomy and injection · Seated
  • 10:05 · Coffee
  • 10:20 · Live anatomy mapping on male and female models · Seated at the front
  • 12:00 · Laboratory opens. Injection phase · Observing from the reference head
  • 12:30 · Dissection: skin and superficial fat · Observing with the anatomist
  • 14:00 · Lunch
  • 15:00 · Dissection: muscles and temporal fascia · Observing with the anatomist
  • 16:30 · Dissection: deep layer and vessels · Observing with the anatomist
  • 17:30 · Recap and discussion · Seated
  • 18:00 · End of day
  • 20:00 · Gala dinner · Optional

Day 2. Lower face

  • 09:00 · Lecture: lower face anatomy and injection · Seated
  • 10:00 · Coffee
  • 10:15 · Live anatomy mapping on male and female models · Seated at the front
  • 12:00 · Laboratory. Injection phase · Observing from the reference head
  • 12:30 · Dissection: skin, superficial fat and muscles · Observing with the anatomist
  • 14:00 · Lunch
  • 15:00 · Dissection: deep layer and arteries · Observing with the anatomist
  • 16:30 · Dissection: nerves and glands · Observing with the anatomist
  • 17:30 · Close, certificates and photographs · Seated

How the observation group works in the laboratory

You are not left standing at the back of the room.

  • The observation group has its own position at the reference head, a specimen dissected in advance by our anatomists. Its left side is opened to the muscle layer and its right side to the bone, so you can see the full depth of the face at any moment.
  • A dedicated anatomist stays with the group for every laboratory block, explaining each layer as it is opened and answering questions.
  • You may walk the tables in small groups to see a structure as it is uncovered.
  • You wear scrubs, and you are in the laboratory for the whole session. This is not watching through a window.

Places are limited to 12. The laboratory has ten working stations and the floor space around them is finite. Observation places close when they are full.

What is included

  • Elearning material , 6 months access.
  • Course notebook.
  • All lectures and both live model sessions.
  • Both days in the laboratory with the observation anatomist.
  • Scrubs and personal protective equipment.
  • Lunch on both days,
  • IAAI certificate of attendance

What is not included

  • You do not have your own specimen and you do not dissect.
  • You do not inject.
  • The certificate is a certificate of attendance. The ICLO and BACME hands-on certification is issued only to participants who complete the laboratory work.
  • Travel and accommodation. We hold a block at a four star hotel near the laboratory and can book it for you.

Course Content

1
e-learning
Prerequisite Course
2
Facial anatomy and injectable cadaver course (filler & Botox from A to Z) - In-Person Session
In Person
Required
ICLO San Francesco di Sales
Verona, Italy
March 21, 2027 – March 22, 2027

Venue Details

ICLO San Francesco di Sales
Verona, Italy

What's Included

  • Elearning material , 6 months access.
  • Course notebook .
  • Your own specimen for both days, shared with three colleagues.
  • All instruments, tinted product, needles and cannulas.
  • Scrubs and personal protective equipment.
  • Lunch on both days and the gala dinner.
  • Reels for Instagram for u from first day till end, delivered after the course.
  • Triple certification.

Certification Details

Status: Certificate Included
Issuing Authorities: ICLO San Francesco di Sales, BACME, IAAI
Type: Triple certification

Reviews

No reviews yet. Be the first to share your experience!

Choose your plan

Hands-on, two days

All 2 modules included
EUR 2130.00

Hands-on, two days with hotel

All 2 modules included
EUR 2575.00

Observation, two days

All 2 modules included
EUR 1030.00

Observation + gala dinner

All 2 modules included
EUR 1105.00

Questions? Chat on WhatsApp

Ready to Transform Your Practice?

Join medical professionals worldwide and take the next step in advancing your career with hands-on, expert-led training.

from EUR 1030.00
Choose a plan